Fountek NeoCd3.0MS 3" Ribbon TweeterRectangular metal face plate, silver finish
Flange is 115mm tall by 75mm wide (4.52" x 2.95")Cut out is 88mm x 61mm (3.46" x 2.4"), Depth is 2.7"
Super strong Neodymium magnetsBuild-in impedance conversion transformer Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance. Thin enforced sandwich ribbon diaphragm guarantees a high degree of signal fidelity and broad frequency response. Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range. Flat impedance from 1,000 to 40,000Hz
Factory matched pairs: Although these are sold each, when you order two you will receive a matched pair.Specifications Ribbon material: Enforced sandwich Ribbon mass: 18mg Ribbon dimension: 8mmX60mmX0.02mm Ribbon area: 480square millimeters Gap flux: 0.6 Tesla Gap height: 3mm Impedance: 7 Ohm DCR: 0.02 ohm Sensitivity: 95dB/M/W Frequency response: 1,400~40,000Hz Resonance frequency: 400Hz Power handling: 17W Normal, 40W Max Recommended crossover frequency: 2,500Hz / 2nd-Order Warning:Ribbon tweeters should always be used with a passive crossover! Do not test without a capacitor.
Click for PDF