Basket |

10 in. Paper/Cloth 56 oz. 300 watts

Code: Delta-10

Price: $88.95

Shipping Weight: 12.00 pounds

Quantity in Basket: None

Product Description:

DELTA 10

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

10", 254mm
8 ohms or 16 ohms
350Wrms
66Hz
65Hz - 3.5kHz
click here for guide
56oz.
0.375", 9.52mm
2.5", 63.5mm

14 - 24 liters
0.5 - 0.84 cu. ft.
10.09", 256.2mm
9.05", 229.7mm
fitted as standard
fitted as standard
0.25", 6.4mm
9.66", 245.4mm
4.25", 108mm
12.2lbs., 5.5 kg.

66Hz
5.42 ohms
0.74mH
0.35
6.53
0.33
30.5 liters
1.08 cu. ft.
55cc
0.18mm/N
14.4 T-M
32 grams

2.04N*sec/M
189
1.6mm
344.9cm²107 ohms
18.80mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets:
Delta 10A - 8 ohm
Delta 10B - 16 ohm

Application Notes

Performance optimized for midrange in three-way systems and bass-mid in two-way systems. Also suitable for bass guitar, keyboards, club music systems, and stage monitors.
_______________

Materials of Construction

Kapton coil former for
increased rigidity and thermal protection
Polyamide-imide coated one-layer, 28ga., aluminum voice coil for lowest possible mass and maximum sensitivity
Ferrite Magnet
Vented core for increased power- handling
Premium pressed steel basket for maximum strength
Paper cone
Rolled cloth cone edge
Solid composition paper dust cap