Basket |

12 in. Paper/Cloth 56 oz. 300 watts

Code: Delta-12

Price: $92.95

Shipping Weight: 12.00 pounds

Quantity in Basket: None

Product Description:

DELTA 12

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

12", 304.8mm
8 ohms or 16 ohms
400Wrms
55Hz
55Hz - 5kHz
click here for guide
56oz.
0.375", 9.52mm
2.5", 63.5mm

64 - 106 liters
2.25 - 3.75 cu. ft.
12.02", 305.2mm
10.97", 278.6mm
fitted as standard
fitted as standard
0.25", 6.4mm
11.63", 295.3mm
5.35", 136mm
13.2lbs., 6 kg.

55Hz
6.3 ohms
0.74mH
0.46
5.27
0.43
81.3 liters
2.87 cu. ft.
82cc
0.21mm/N
13.5 T-M
39 grams

2.55N*sec/M
119
1.6mm
519.5cm²78 ohms
19.81mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets:
Delta 12A - 8 ohm
Delta 12B - 16 ohm

Application Notes

Performance optimized for sound reinforcement systems. Also suitable for lead and bass guitar, keyboards, guitar combos, club music systems, and stage monitors.
_______________

Materials of Construction

Kapton coil former for
increased rigidity and thermal protection
Polyamide-imide coated two-layer, 29ga., aluminum voice coil for lower mass and increased sensitivity
Ferrite Magnet
Vented core for increased power- handling
Premium pressed steel basket for maximum strength
Paper cone
Cloth cone edge
Solid composition felt dust cap