10 in. Neodymium Magnet 300 watts RMS

Code: DeltaLiteII2510

Price: $209.95

Shipping Weight: 9.00 pounds

Quantity in Basket: None

DELTALITE� II 2510

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
     (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

10", 254mm
8 ohms
300Wrms
41Hz
40Hz - 3.5kHz
click here for guide
7oz.
0.275", 6.99mm
2.5", 63.5mm

28 liters
1.0 cu. ft.
10.25", 260.4mm
9.15", 232.4mm
fitted as standard
fitted as standard
0.275", 6.99mm
9.73", 247.14mm
4.94", 125.58mm
7.5 lbs., 3.4 kg.

41Hz
5.47 ohms
0.68mH
0.31
5.89
0.29
107.9 liters
3.8 cu. ft.
136cc
0.63mm/N
10.6 T-M
24.2 grams

1.06N*sec/M
136
3.9mm
350.1cm²112 ohms
19.2mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets: DeltaLite 2510

Materials of Construction

Kapton coil former for increased rigidity and thermal protection
Polyamideimide coated edgewound aluminum voice coil with BeCu lead-outs for durability, increased sensitivity, and power handling
Neodymium magnet for substantial weight reduction
Lightweight die-cast aluminum basket for rigidity
Paper cone
Rolled cloth cone edge with deep corrugations for extended Xmax
Aluminum phasor/heatsink to transfer heat from the motor structure and smooth response
Screened cloth dust cap for enhanced cooling and protection

Quantity: