ScanSpeak Discovery Line 26W/4558T 10" Subwoofer - 4 ohm
Aluminium Cone, Black Anodized
Fiberglass/Paper Sandwich Dust Cap, Black Coated
56 mm peak excursion – 25mm linear (X-max)
Aluminum Short Circuiting Ring
Aluminum Pole Piece Extension to reduce distortion and power compression
Titanium Voice coil former
Vented cone / dustcap
Low damping rubber surround
Litz wire woven into the spider
Suggested box alignments:
Sealed box of 0.5 cubic foot for use in autosound systems.
One cubic foot box with matching 26W/0-00 passive radiator for use in home or autosound systems. For home, it would be best to use a plate amplifier with a boost. You'll get plenty of cabin gain in an autosound install.
Two cubic feet with a 3" diameter vent by 12" long for an F3 of 27Hz.