Eminence Alpha 10 in. Paper/Cloth 20 oz. 100 watts

Code: Alpha-10A

Price: $99.95

Shipping Weight: 7.00 pounds

Quantity in Basket: None

Product Description:

ALPHA 10

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

10", 254mm
8 ohms
150Wrms
50Hz
45Hz - 5kHz
click here for guide
20oz.
0.25", 6.35mm
1.5", 38.1mm

42 - 71 liters
1.5 - 2.5 cu. ft.
10.11", 256.8mm
9.13", 231.8mm
fitted as standard
fitted as standard
0.225", 5.7mm
9.6", 243.8mm
3.90", 99mm
5.8lbs., 2.6 kg.

50Hz
5.31 ohms
0.66mH
0.66
5.21
0.59
82.2 liters
2.9 cu. ft.
113cc
0.46mm/N
7.5 T-M
22 grams

1.33N*sec/M
75
3.2mm
355.4cm²47 ohms
18.29mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets: Alpha 10

Application Notes

Ideal for two-way sound reinforcement systems, keyboard, and guitar combos.
__________________

Materials of Construction

Kapton coil former for
increased rigidity and thermal protection
Polyamide-imide coated two-layer, 31ga., copper voice coil for improved power handling and durability.
Ferrite Magnet
Vented core for increased power handling
Premium pressed steel basket for maximum strength
Paper cone
Cloth cone edge
Solid composition paper dust cap