10 in. Paper/Cloth 34 oz. 150 watts Coaxial

Code: Beta-10CX

Price: $82.95

Shipping Weight: 8.00 pounds

Quantity in Basket: None

BETA 10 CX

For all high power bass applications including bass guitar.

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
(with APT-50 and pxb2:3k5)
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

10", 254mm
8 ohms
250Wrms
38Hz
35Hz - 20kHz

click here for guide
38oz.
0.312", 7.94mm
2", 50.8mm

37 - 62 liters
1.3 - 2.2 cu. ft.
10.08", 256.1mm
9.05", 229.7mm
fitted as standard
fitted as standard
0.25", 6.4mm
9.66", 245.4mm
3.98", 101.1mm
8.4lbs., 3.8 kg.

38Hz
5.64 ohms
0.99mH
0.29
10.34
0.29
131 liters
4.63 cu. ft.
104cc
0.78mm/N
10.1 T-M
22 grams

0.51N*sec/M
131
3.0mm
344.9cm²204 ohms
15.24mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets: Beta 10 CX

Application Notes

The Beta 10CX is a coaxial speaker to which a compression driver must be
attached. Eminence recommends the APT-50 supertweeter with the APT-3 adaptor and the pxb2:3k5 2-way crossover with this product (not included). Ideal for full-range, near field and monitoringapplications.

_______________

Materials of Construction

Kapton coil former for
increased rigidity and thermal protection
Polyamide-imide coated two-layer, 30ga., copper voice coil for improved power handling and durability.
Ferrite Magnet
Extended core for increased power handling
Premium pressed steel basket for maximum strength
Paper cone
Cloth cone edge
Screened cloth dust cap
Aluminum horn

Quantity: