Mounting Information Recommended Enclosure Volume (vented) Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Shipping Weight
Thiele-Small Parameters Resonant Frequency (fs) Impedance (Re) Coil Inductance (Le) Electromagnetic Q (Qes) Mechanical Q (Qms) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass inc. Airload (Mms) Equiv. Resistance of Mechanical Suspension Loss (Rms) Efficiency Bandwidth Product (EBP) Voice Coil Overhang (Xmax) Surface Area of Cone (Sd) Impedance at Resonance (Zmax) Maximum Mechanical Limit (Xmech)
15", 381mm 8 ohms 600Wrms 39Hz 35Hz - 3kHz click here for guide 95oz. 0.375", 9.52mm 3.0", 76.2mm
82 - 139 liters 2.9 - 4.9 cu. ft. 15.16", 384.9mm 13.77", 349.6mm fitted as standard fitted as standard 0.25", 6.4mm 14.56", 369.9mm 6.375", 162mm 22.1 lbs., 10 kg.
39Hz 5.4 ohms 1.27mH 0.41 6.08 0.38 159 liters 5.6 cu. ft. 471cc 0.15mm/N 18.6 T-M 105 grams 4.28N*sec/M 97 5.5mm 856.3cm2 86 ohms 20.83mm
Eminence response curves are measured under the following controlled test conditions:
To download spec sheets: Kappa 15LF
APPLICATION NOTES
Eminence LF models are specially designed with extended Xmax to deliver more bass than standard models and provide 'a true woofer' for three-way applications. This unit has been designed to give a clean extended bass response in ported cabinets of approx. 110 liters (3.9 cu. ft.). An ideal speaker for portable high power P.A. and club system applications. _______________ Materials of Construction
Kapton coil former for increased rigidity and thermal protection
Polyamide-imide coated two-layer, 28ga., copper voice coil for improved power-handling and durability
Ferrite Magnet
Vented core for increased power-handling
Premium pressed steel basket for maximum strength
Paper cone
Rolled cloth cone edge with deep corrugations for extended Xmax
Solid composition paper dust cap