15 in. Paper/Cloth 109 oz. 1000 watts Cast Frame

Code: KilomaxPro15A

Price: $299.95

Shipping Weight: 11.00 pounds

Quantity in Basket: None

Product Description:

KILMOMAX 15

For esoteric high power bass applications

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

15", 381mm
8 ohms
1,250Wrms
41Hz
35Hz - 1.5kHz
click here for guide
109oz.
0.375", 9.52mm
4.0", 101.6mm

92 - 150 liters
3.25 - 5.30 cu. ft.
15.21", 386.4mm
14.0", 355.5mm
fitted as standard
fitted as standard
0.275", 7mm
14.56", 369.9mm
6.42", 163mm
28lbs., 12.7 kg.

41Hz
4.97 ohms
1.78mH
0.40
8.80
0.39
154.5 liters
5.46 cu. ft.
680cc
0.15mm/N
17.7 T-M
98 grams

2.91N*sec/M
102
7.9mm
856.3cm²113 ohms
26.92mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets: Kilomax 15

Materials of Construction

Kapton coil former for increased rigidity and
thermal protection
Polyamide-imide coated two-layer, 26ga., copper voice coil for improved power-handling and durability
Ferrite Magnet
0.25" extended core for greater cone travel and increased power handling
Die-cast aluminum basket for rigidity
Paper cone
Kilomax^{^�} aluminum heatsink to transfer heat from the motor structure
Core Periphery Ventilation