15 in. Paper/Cloth 80 oz. 500 watts Cast Frame

Code: KappaP-15A

Price: $159.99

Shipping Weight: 20.00 pounds

Quantity in Basket: None

Product Description:

KAPPA PRO 15

For all high power bass applications including bass guitar.

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Impedance at Resonance (Zmax)
Maximum Mechanical Limit (Xmech)

15", 381mm
8 ohms
500Wrms
47Hz
40Hz - 4kHz
click here for guide
80oz.
0.375", 9.52mm
3.0", 76.2mm

106 - 177 liters
3.75 - 6.25 cu. ft.
15.32", 389mm
14.0", 355.5mm
fitted as standard
fitted as standard
0.275", 7mm
14.56", 369.9mm
6.06", 154mm
20lbs., 9.1 kg.

47Hz
5.23 ohms
1.01mH
0.40
8.01
0.38
167.7 liters
5.92 cu. ft.
272cc
0.16mm/N
16.6 T-M
72 grams

2.62N*sec/M
117
3.2mm
856.3cm²110 ohms
26.42mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets: Kappa Pro15

Materials of Construction

Kapton coil former for
increased rigidity and thermal protection
Polyamide-imide coated two-layer, 27ga., aluminum voice coil for lower mass and increased sensitivity
Ferrite Magnet
Vented and extended core for increased power- handling
Die-cast aluminum basket for rigidity
Paper cone
Cloth cone edge
Solid composition paper dust cap