15 in. Paper/Cloth 80 oz. 600 watts Cast Frame

Code: KappaP-15LF-2

Price: $184.95

Shipping Weight: 25.00 pounds

Quantity in Basket: None

KAPPA PRO 15LF

Nominal Basket Diameter
Impedance
Power Rating
Resonance
Usable Frequency Range
Sensitivity
Magnet Weight
Gap Height
Voice Coil Diameter

Mounting Information
Recommended Enclosure Volume
   (vented)
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Depth
Shipping Weight

Thiele-Small Parameters
Resonant Frequency (fs)
Impedance (Re)
Coil Inductance (Le)
Electromagnetic Q (Qes)
Mechanical Q (Qms)
Total Q (Qts)
Compliance Equivalent Volume (Vas)

Peak Diaphragm Displacement Volume (Vd)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
Diaphragm Mass inc. Airload (Mms)
Equiv. Resistance of Mechanical
Suspension Loss (Rms)
Efficiency Bandwidth Product (EBP)
Voice Coil Overhang (Xmax)
Surface Area of Cone (Sd)
Maximum Mechanical Limit (Xmech)

15", 381mm
8 ohms
600Wrms
35Hz
40Hz - 2kHz
click here for guide
120oz.*
0.375", 9.52mm
3.0", 76.2mm

82 - 139 liters
2.9 - 4.9 cu. ft.
15.32", 389mm
14.0", 355.5mm
fitted as standard
fitted as standard
0.275", 7mm
14.56", 369.9mm
6.57", 167mm
25.4lbs., 12 kg.

35Hz
6.12 ohms
1.04mH
0.32
9.57
0.31
172.5 liters
6 cu. ft.
458.7cc
0.21mm/N
20.36 T-M
100.3 grams

2.284N*sec/M
107
6.03mm
760.4cm²34.45mm

Eminence response curves are measured under the following controlled test conditions:

All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance
LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle
2ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction
Hafler P1500 Trans-Nova amplifier
2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)

To download spec sheets: Kappa Pro15 LF

Application Notes

Eminence LF models are
specially designed with extended Xmax to deliver more bass than standard models and provide 'a true woofer' for three-way applications. This unit has been specially designed to give a clean extended bass response in ported cabinets of approx. 110 liters (3.9 cu. ft.). An ideal speaker for portable high power P.A. and club music systems.
_______________

Materials of Construction

Kapton coil former for increased rigidity and thermal protection
Polyamide-imide coated two-layer, 28ga., copper voice coil for improved power handling and durability
Ferrite Magnet (*recently improved with a 120oz. magnet)
Vented for increased power handling
Die-cast aluminum basket for rigidity
Paper cone
Rolled cone edge with deep corrugations for extended Xmax
Solid composition paper dust cap

* Made an improvement to the Kappa Pro-15LF on 08/04/03 by increasing the magnet size.

Quantity: